Wood Grain · 1.5" x 3" · Magnet
Wood Grain 1.5 x 3 Premium Badge
A wood grain premium badge in the 1.5 x 3 size with magnet backing. This page covers the exact blank, what fits on it, what it costs at each quantity break, and the design tool that opens with this blank already loaded.
as low as $9.99 per badge at 1,001+
The design tool opens with this exact blank, size and backing already loaded, so the proof you approve is the badge you get.
- Size
- 1.5 x 3 inches
- Finish
- Wood Grain
- Backing
- Magnet
- Printable area
- 2.75 x 1.25 in
$12.84$14.76Save 15%
What the wood grain 1.5 x 3 blank actually is
Each one starts as a metal-faced badge: a thin metal sheet bonded to a rigid core, printed and clear coated.
The printed wood grain gives the warmth of wood at plastic pricing and stays perfectly uniform badge to badge, unlike real veneer. Metal face bonded to core, printed in full color, clear coated.
The metal face keeps a flat, sharp edge for years and does not bow in a hot car the way pure plastic can. Brushed finishes hide fingerprints better than mirror ones.
How much text fits on 1.5 x 3
The printable window on this blank is 2.75 x 1.25 in, which leaves room for a logo, a full first name at readable size and a department line underneath without crowding.
Names are the thing that breaks a layout, not titles. Set the longest name on your list first, then size everything else around it. If it will not fit at the size in the table below, drop to a first name plus last initial before you shrink the type, because a badge nobody can read from four feet away is worse than a shortened name.
Magnet backing on this one
The magnetic backer leaves no holes, which matters on knit polos, silk and personal clothing. Keep it away from wallets with magnetic-stripe cards and away from anyone with an implanted cardiac device, and hand it to people by the badge, not by the backer.
Every badge ships assembled with the backing already attached, so nothing gets built on your end.
What it costs and when the price drops
This option is $12.84 each at low quantity. The same blank runs down to $9.99 once you reach the top quantity break, so a full-staff order lands well under a piecemeal one. Prices include setup and a digital proof.
Reordering the same artwork later costs the same as the first run. We keep the file, so a single replacement badge takes a name and a reply, not a fresh setup.
Who orders the wood grain version
Front-of-house teams that want a metal look without solid metal pricing: hotels, banks, dealerships, senior living.
If you are outfitting more than one department, order this variant for one group and use a different finish for the other. It reads as intentional and it makes badges easier to sort at the end of a shift.
Text fit on this size
| Line | Type size | Fits |
|---|---|---|
| Name line, no logo | 30 pt bold | about 15 characters |
| Name line with a logo on the badge | 30 pt bold | about 10 characters |
| Title or department line | 14 pt | about 26 characters |
| Title line with a logo on the badge | 14 pt | about 18 characters |
Counts assume a bold sans face and include spaces. Check your longest name in the text fit checker.
Pick this, or pick one of these
Full specs
- Size
- 1.5 x 3 inches
- Finish
- Wood Grain
- Backing
- Magnet
- Printable area
- 2.75 x 1.25 in
- Name line
- about 15 characters at 30 pt
- Material
- Metal face bonded to core, printed in full color, clear coated.
- Proof
- Digital proof before production
- Made in
- United States
Questions about this option
Will a long name fit on the 1.5 x 3 size?
At the 30 pt name size we use for this blank you get roughly 15 characters, or about 10 once a logo shares the badge. Longer than that and we set a first name with a last initial rather than shrinking the type.
Can I order a single wood grain badge?
Yes. There is no minimum, and one badge gets the same proof and the same production process as a hundred. Volume pricing starts at the first quantity break shown on this page.
Can I switch this to a different backing?
Yes. The same blank is available with a pin back if a department cannot use magnets. Pick the backing in the design tool or ask for it on a quote.
How long does a premium badges order take?
Standard production is 5 to 8 business days after proof approval, with rush available in 1 to 3. Reorders of the same artwork move faster because the file is already set.
Other premium badges options
Every option below has its own page, its own price and its own design tool.
How premium badges orders work
Every order follows the same five steps, whether it is one badge or five thousand.
- 1
Select Style
Pick a badge family, size and shape from the catalog.
- 2
Upload Logo
Drop in your artwork. File cleanup is included free.
- 3
Add Names
Type one name or paste a spreadsheet of five hundred.
- 4
Verify Proof
Approve a digital proof before anything goes to production.
- 5
Fast Delivery
Ships in 5-8 business days, or 1-3 business days with rush.
Built in our own Florida plant
Badges are produced and shipped from Cooper City, Florida, so proofs, reprints and rush jobs never leave our building.
- Scratch-resistant printed and anodized surfaces
- Strong magnetic fasteners that do not pierce clothing
- Full-color digital printing at no extra charge
- Precision laser engraving on metal products
- Manufactured in the USA in Cooper City, Florida
- No setup fees, no art fees and no minimum order
Ready to design your badges?
Use the online designer to build your badge, or send us your list and we will quote it today.